REVERB EFFECT
Add reverb to audio
Put a dry voice, instrument or song in a room, a hall or a cathedral. Choose how much reverb and how big the space is, hear it, and download an MP3. The speed and pitch stay exactly as they were.
Hear a short original beat dry, then put it in a large hall.
Room presets: . Speed and pitch stay unchanged.
Add reverb to a recording in three steps
- Choose an audio or video file. A video gives you an audio-only MP3 with the reverb.
- Set the reverb mix, the room size in seconds and the pre-delay. Start around 25 percent, 1.5 seconds and 30 ms.
- Press Add reverb, listen to the preview, and download the MP3. Change one setting at a time and compare.
How the reverb is made
This is a convolution reverb, the same method studio plug-ins use to imitate real spaces. The page generates an impulse response: a short burst of sound that dies away the way reflections fade in a room, darker towards the end because real walls absorb treble faster than bass. Your audio is convolved with that impulse, which means every sample gets its own decaying echo pattern, and the result is blended with the dry sound. The two stereo channels use different random reflections, so even a mono voice comes out wide. Unlike the slowed and reverb generator, nothing is resampled: the tempo and the key stay the same.
Settings for common jobs
Spoken voice-overs and podcasts need very little: 8 to 15 percent mix, a 0.4 to 0.8 second room and 20 ms pre-delay, just enough that the voice no longer sounds like it was recorded in a cupboard. Sung vocals usually sit at 20 to 30 percent with a 1.2 to 2 second hall and 40 to 60 ms pre-delay. Acoustic guitar and piano take 15 to 25 percent and 1 to 2 seconds. Ambient pads, drones and cinematic effects can go to 50 percent and 4 to 8 seconds. If the words get hard to understand, lower the mix before you shorten the room.
Why the file gets a little longer
A reverb keeps ringing after the last note. The export adds the length of the tail, so a 30 second clip with a 2 second room becomes about 32 seconds long, and the last sound fades out naturally instead of stopping dead. If you need the original length, trim the end afterwards with the audio trimmer and add a short fade out. The level is checked after the reverb is added and lowered only if the peaks would clip.
Limits
Reverb cannot be undone once it is mixed in, so keep your dry original. The reverb is generated, not a measured impulse from a famous hall, and there is no separate early-reflection or damping control. Heavy reverb on a recording that already has room echo makes it muddier; for that problem, use the remove echo tool instead. Processing happens on your device and the file is never uploaded.
Frequently asked questions
How do I add reverb to audio online?
Choose the file, set the reverb mix, room size and pre-delay, and press Add reverb. Listen to the preview and download the MP3. Nothing is uploaded.
How much reverb should I add to vocals?
Most vocals sound natural with 20 to 30 percent mix, a 1.2 to 2 second room and 40 to 60 ms pre-delay. For speech, stay under 15 percent and under a second.
Does adding reverb change the speed or pitch?
No. This page only adds the reverb. To slow the song down and lower the pitch as well, use the slowed and reverb generator.
Can I add reverb to a video?
Yes, choose the video file. The download is the soundtrack as an MP3 with reverb; the picture is not included.
All processing runs locally in your browser memory via WebAssembly and Web Audio. Files never leave your device. Built-in peak limiting prevents audio clipping.
AudioClover Engineering · Updated October 2026KEEP IN THE LOOP
A better workflow for your next recording.
Get tool updates and audio tips. Batch presets and a podcaster plan are on the roadmap.